Micellar behavior of well‐defined polystyrene‐based block copolymers with triethoxysilyl reactive groups and their hydrolysis–condensation

Block copolymers of acryloxy propyl triethoxysilane and styrene were prepared through nitroxide‐mediated polymerization using alkoxyamine initiators based on N‐tert‐butyl‐1‐diethylphosphono‐2,2‐dimethylpropyl nitroxide. The copolymers were characterized by ¹H NMR, size exclusion chromatography and differential scanning calorimetry. Their micellar behavior in dioxane/methanol solutions was examined through static light scattering and transmission electron microscopy (TEM). TEM indicated the successful formation of spherical micelles which were subsequently frozen by the sol–gel process. Hydrolysis–condensation of the reactive ethoxysilyl side groups was followed by FTIR, ¹H NMR, and ²⁹Si NMR. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 784–793, 2010     

Evaluation of chromatographic and spectroscopic methods for the analysis of petroleum-derived compounds in the environment

Summary Analytical protocols have been adapted for the study of hydrocarbons at the trace level in the environment. Various samples, including sediments and biota, were collected from the Kuwaiti environment, treated according to the protocol and analyzed by chromatographic and spectroscopic methods. The methods used were synchronous scanning fluorescence spectroscopy (SSFS); high-performance liquid chromatography (HPLC) on C18 reversed-phase and NH2 normal-phase columns with UV and fluorescence detectors; gas chromatography on fused-silica capillary columns (GC) with flame ionization detector (FID), mass spectrometer (MS) and flame photometric detector (FPD); and high-resolution molecular spectrofluorimetry in Shpol'skii matrix at 10 K (HRSS). The different methods were found to give complementary information. SSFS was useful for fast evaluation and preliminary assessment of oil pollution during extended programs; it permitted sample selection for deeper analyses but, when applied to biota, needed special care in the clean-up procedure. GC/FID, was used to analyze saturated and ethylenic compounds and was useful for obtaining information on the origin of hydrocarbons but inconvenient for analyzing the aromatic fraction. GC/FPD was difficult to use with sediment samples and yielded little information on biota samples, although it did permit confirmation of high oil contamination in some examples. HPLC on a normal-phase column with UV and fluorescence detectors was useful for the fractionation of samples and for the separation of different families of aromatic compounds according to aromatic carbon number. GC/MS was used to quantify polycyclic aromatic hydrocarbons (PAHs) of less than four cycles but was not sensitive enough for PAHs of higher molecular weight. HRSS, however, was useful for the quantification of heavy PAHs and was also faster, could be automated, and gave accurate results. However, in an oil-pollution study, it must be backed up by the other techniques. In fact, no single analytical technique was found to be sufficient, and only judicious combinations of the tested techniques yielded adequate information on the origin of hydrocarbons in the environment.     

Making molecular balloons in laser-induced explosive boiling of polymer solutions

The effect of the dynamic molecular rearrangements leading to compositional segregation is revealed in coarse-grained molecular dynamics simulations of short pulse laser interaction with a polymer solution in a volatile matrix. An internal release of matrix vapor at the onset of the explosive boiling of the overheated liquid is capable of pushing polymer molecules to the outskirts of a transient bubble, forming a polymer-rich surface layer enclosing the volatile matrix material. The results explain unexpected "deflated balloon" structures observed in films deposited by the matrix-assisted pulsed laser evaporation technique.     

Characterization of carboxylated nanolatexes by capillary electrophoresis

Poly(styrene-co-acrylic acid) (St/AA) and poly(styrene-co-methacrylic acid) (St/MA) nanolatexes with different acid contents were prepared by emulsion copolymerization and were analyzed by capillary electrophoresis (CE) and by laser doppler velocimetry (LDV). Due to the intrinsic differences in the methodologies, CE (separative technique) and LDV (zetametry, nonseparative technique) lead to very different electrophoretic mobility distributions. Beyond these differences, the variation of the electrophoretic mobility is a complex and nonlinear function of the hydrodynamic radius, the ionic strength, and the zeta potential. To gain better insight on the influence of the ionic strength and the acid content on the electrophoretic behavior of the nanolatexes, the electrophoretic mobility data were changed into surface charge densities using the O'Brien, White, and Ohshima modeling. This approach leads to the conclusion that the surface charge density is mainly controlled at high ionic strength (～50 mM) by the adsorption of anionic surfactants coming from the sample. On the contrary, at low ionic strength, and/or in the presence of neutral surfactant in the electrolyte, the acid content was the main parameter controlling the surface charge density of the nanolatexes.     

A kinetic investigation of surfactant‐free emulsion polymerization of styrene using laponite clay platelets as stabilizers

We report the kinetics and mechanism of soap‐free emulsion polymerization of styrene using laponite platelets as stabilizers. The polymerization was initiated by potassium persulfate and the latex particles were stabilized by laponite platelets dispersed in water. Laponite adsorption on the polymer particles was enhanced by the addition of poly(ethylene glycol) monomethylether methacrylate (PEGMA). Particle nucleation can be described using the classical homogeneous nucleation mechanism followed by coagulation of unstable precursors. Oligomeric radicals formed in the water phase become insoluble and precipitate on the laponite surface leading to primary precursor particles composed of a few polymer chains and one or several clay platelets. Mature latex particles are then generated by coagulation and growth of the previously formed precursor particles. Both the nucleation and initial aggregation rates increased in the presence of PEGMA. Calorimetric monitoring of the polymerization allowed estimating the heat produced by the reaction and the monomer conversion. Hence, using the monomer material balance, the number of radicals in the polymer particles could be estimated precisely. The average number of radicals per particle, $ \bar n $ , was found to be high in the range 3–6. This result was attributed to strong attractive interactions between the growing radicals and the clay surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Biosensors elaborated on gold nanoparticles, a PM-IRRAS characterisation of the IgG binding efficiency

This work is focused on studying the grafting of gold nanoparticles (Np) on a cystamine self-assembled monolayer on gold, in order to build sensitive immunosensors. The synthesis and deposition of gold nanoparticles, 13 and 55 nm sizes, were characterised by combining Polarisation Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS), X-ray Photoelectron Spectroscopy (XPS) Surface Enhanced Raman Scattering (SERS), and Atomic Force Microscopy (AFM) which all indicated the formation of a dispersed layer of nanoparticles. This observation is explained by the compromise between the high reactivity of amine-terminated layers towards gold, and interparticle repulsions. Nps were then functionalised with antibody probes, and the recognition by an anti-rIgG was assayed both on planar and Np gold surfaces.The important result is that nanoparticles of 55 nm are preferable for the following reasons: they enable to build a denser and well dispersed layer and they increase both the number of receptors (IgGs) and their accessibility. Beside these geometric improvements, a net enhancement of the Raman signal was observed on the 55 nm nanoparticle layer, making this new platform promising for optical detection based biosensors.     

New ammonium surfactant-stabilized rhodium(0) colloidal suspensions: influence of novel counter-anions on physico-chemical and catalytic properties

Novel anionic species, such as hydrogen carbonate (HCO(3)(?)), fluoride (F(?)), triflate (CF(3)SO(3)(?)), tetrafluoroborate (BF(4)(?)) and chloride (Cl(?)) were investigated as new partners of water soluble N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl) ammonium salts, used as a protective agent of rhodium colloids. The effect of the surfactant polar head on the micellar behavior, size and morphology of the nanospecies was studied by adapted physico-chemical experiments (surface tension measurements, dynamic light scattering, thermogravimetric and TEM analyses) and discussed in terms of strong or weak stabilization of the growing nanoparticles surface. Finally, the influence of the nanoenvironment generated by the surfactant with various counter-anions was evaluated via the hydrogenation of aromatics.     

Stereoselective organocatalytic one-pot α,α-bifunctionalization of acetaldehyde by a tandem Mannich reaction/electrophilic amination

The first asymmetric organocatalyzed one-pot α,α-bifunctionalization of acetaldehyde with two different electrophiles is described. A diarylprolinol silyl ether-catalyzed reaction of acetaldehyde with an imine and di-tert-butyl azodicarboxylate affords syn-2,3-diaminoalcohols with excellent ee values of up to 98%. This methodology was successfully applied to the synthesis of a chiral α,β-diaminocarboxylic acid.     

Noninvasive assessment of hepatic fibrosis in patients with chronic hepatitis C using serum Fourier transform infrared spectroscopy

Assessment of liver fibrosis is of paramount importance to guide the therapeutic strategy in patients with chronic hepatitis C (CHC). In this pilot study, we investigated the potential of serum Fourier transform infrared (FTIR) spectroscopy for differentiating CHC patients with extensive hepatic fibrosis from those without fibrosis. Twenty-three serum samples from CHC patients were selected according to the degree of hepatic fibrosis as evaluated by the FibroTest: 12 from patients with no hepatic fibrosis (F0) and 11 from patients with extensive fibrosis (F3–F4). The FTIR spectra (ten per sample) were acquired in the transmission mode and data homogeneity was tested by cluster analysis to exclude outliers. After selection of the most discriminant wavelengths using an ANOVA-based algorithm, the support vector machine (SVM) method was used as a supervised classification model to classify the spectra into two classes of hepatic fibrosis, F0 and F3–F4. Given the small number of samples, a leave-one-out cross-validation algorithm was used. When SVM was applied to all spectra (n = 230), the sensitivity and specificity of the classifier were 90.1% and 100%, respectively. When SVM was applied to the subset of 219 spectra, i.e., excluding the outliers, the sensitivity and specificity of the classifier were 95.2% and 100%, respectively. This pilot study strongly suggests that the serum from CHC patients exhibits infrared spectral characteristics, allowing patients with extensive fibrosis to be differentiated from those with no hepatic fibrosis.     

Geometric and electronic structures of peroxomanganese(III) complexes supported by pentadentate amino-pyridine and -imidazole ligands

Three peroxomanganese(III) complexes [Mn(III)(O(2))(mL(5)(2))](+), [Mn(III)(O(2))(imL(5)(2))](+), and [Mn(III)(O(2))(N4py)](+) supported by pentadentate ligands (mL(5)(2) = N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine, imL(5)(2) = N-methyl-N,N',N'-tris((1-methyl-4-imidazolyl)methyl)ethane-1,2-diamine, and N4py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) were generated by treating Mn(II) precursors with H(2)O(2) or KO(2). Electronic absorption, magnetic circular dichroism (MCD), and variable-temperature, variable-field MCD data demonstrate that these complexes have very similar electronic transition energies and ground-state zero-field splitting parameters, indicative of nearly identical coordination geometries. Because of uncertainty in peroxo (side-on η(2) versus end-on η(1)) and ligand (pentadentate versus tetradentate) binding modes, density functional theory (DFT) computations were used to distinguish between three possible structures: pentadentate ligand binding with (i) a side-on peroxo and (ii) an end-on peroxo, and (iii) tetradentate ligand binding with a side-on peroxo. Regardless of the supporting ligand, isomers with a side-on peroxo and the supporting ligand bound in a tetradentate fashion were identified as most stable by >20 kcal/mol. Spectroscopic parameters computed by time-dependent (TD) DFT and multireference SORCI methods provided validation of these isomers on the basis of experimental data. Hexacoordination is thus strongly preferred for peroxomanganese(III) adducts, and dissociation of a pyridine (mL(5)(2) and N4py) or imidazole (imL(5)(2)) arm is thermodynamically favored. In contrast, DFT computations for models of [Fe(III)(O(2))(mL(5)(2))](+) demonstrate that pyridine dissociation is not favorable; instead a seven-coordinate ferric center is preferred. These different results are attributed to the electronic configurations of the metal centers (high spin d(5) and d(4) for Fe(III) and Mn(III), respectively), which results in population of a metal-peroxo σ-antibonding molecular orbital and, consequently, longer M-O(peroxo) bonds for peroxoiron(III) species.